Marshall Electronics V-MD173, Руководство по эксплуатации, Страница: 24 / 36

24
Network Control Page
This MD Series monitor allows you to fully control all settings via a Lan100 Ethernet port on the rear of the monitor. Simply
connect the MD Series monitor to your network with an Ethernet patch cable and access the monitor’s Host Name or IP Address
via any web browser on your computer and take control.
Power Tab
Power / Input Page
■
Power
Use this row to determine the Power status for each of the screens on the unit. A green ON box indicates that the screen is
currently on. A red OFF box indicates that the unit is off. Press the box to toggle the screen ON or OFF.
■
Input
The input field allows you to identify the module type currently in your monitor’s slot.
■
Format
This text field determines the input format currently being displayed on a particular monitor screen. A No Signal string
indicates that there is no signal present.
Menu Tab
Video Config
■
Color Temperature
Use this row to set the current Color Temperature preset being used on the screen.
■
Gamma
Use this row to set the current Gamma preset being used on each screen.
■
RGB Bias and Gain
Click the Adjust button in this row to move into the RGB Bias and Gain controls. This is covered in depth in previous sections
of this manual, in the Image Adjust submenu.
■
Check Field
Use this row to set the current Check Field mode being used on an individual screen.
■
Aspect Ratio
Use this row to set the current Aspect Ratio mode being used on an individual screen.
■
Pixel-to-Pixel
Use this row to set the current state of the Pixel-to-Pixel feature of the monitor. Pressing one of the boxes under each Screen
type will either turn Pixel-to-Pixel mode OFF or ON.