Marshall Electronics V-LCD70MD, Руководство по эксплуатации

Страница: 17 / 32

17
■
Line Color
Use this setting to select a custom color for the Screen Markers. You can choose between White (default), Yellow, Red,
Green and Blue.
■
Transparency
Use this setting to select the transparency of the marker background. Choose between 0% (black) , 25%, 50%, 75% and
100% (see through) transparency.
Filters Submenu
Use the Filters Submenu to enable various modes.
■
Check Field
Use the check field modes for monitor calibration or to analyze individual color components of an image. In Monochrome
mode, all color is disabled and only a grayscale image is shown. In Blue, Green, and Red check field modes, only the selected
color will be shown.
Use the following procedure when calibrating the monitor to SMPTE color bars with the following procedure:
1. Allow the monitor to warm up for at least 5-10 minutes.
2. Display SMPTE split-field color bars on the monitor using an external source.
3. Enable Monochrome mode .
4. Locate the pluge pattern (super black, black, and gray bars) at the lower-right corner of the screen. Adjust the
Brightness knob until there is no visible difference between the super black and black bars, but the gray bar is still
visible.