manualshive.com logo in svg

Marshall Electronics AR-DM3X, Руководство по эксплуатации

Поделиться
Скачать
Marshall Electronics AR-DM3X Скачать руководство пользователя страница 6

6

Installation and Initial Setup

Unpacking

Carefully unpack the AR-DM3X-X audio monitor and verify that the following items are included:

• AR-DM3X-X Audio Monitor

*

• XLR Power Supply
• Operating Instructions

*

AR-DM3X-X series monitors may be pre-configured with input/output modules or DOLBY module if ordered as such.

DOLBY module installation is indicated by a label on the exterior of the unit.

Inspect the unit for any physical damage that may have occurred during shipping. Should there be any damage,
immediately contact Marshall Electronics at (800) 800-6608. If you are not located within the continental United States,
call +1 (310) 333-0606.

Input / Output Module Installation

If your audio monitor has not been pre-configured with input and output modules at the factory, you must install at least
one input module to use the audio monitor. Additional modules can also be purchased and installed when needed. The
modules are designed for simple installation and removal without tools. For detailed instructions, see

Module

Installation

.

Note:

Modules cannot be installed or “hot swapped” while the audio monitor is powered on. Ensure that the audio monitor

is powered off before installing or removing modules.

Audio Monitor Installation

The AR-DM3X-X audio monitor series can be installed in an EIA-standard 19-inch rack. Alternately, the AR-DM3X-X
audio monitor can be placed on any level surface.

For optimum sound quality, the audio monitor should be installed at ear

level.

Module Installation

Input / Output Module Installation

The ARDM-series input and output modules are designed for simple installation and removal without tools. Use the
following instructions to install a module:

1. Ensure that the audio monitor is powered off.

Modules cannot be installed or “hot swapped” while the audio monitor

is powered on.

2. Remove the blank cover if present over the empty slot using a Philips screwdriver with appropriate head size.

3. Carefully slide the module into the open slot, aligning the side edges of the module with the guides inside the

monitor. Push the module all the way in until it locks into place.

4. Tighten the two thumbscrews on the face of the module.

Note:

Avoid touching components inside the module to prevent static discharge

THUMB SCREWS

EMPTY SLOT

COVER

Содержание AR-DM3X













Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды