ENGLISH
2
1. Footswitch Jack
Channels on the G30RCD can be switched via
either the front panel or via a footswitch. This
jack is for connection of the footswitch (model
P801).
2. Channel Select Push Switch
For changing channels via the front panel.
3. Input
Plug your guitar in here. We recommend that you
always use a high quality screened cable to help
prevent noise, interference and unwanted
feedback.
4. Volume
This controls the volume of the Clean Channel and
is useful for balancing the level of the Overdrive
and Clean Channels. Once turned past half way
this channel will start to crunch up your guitar
sound for semi-distorted chords and bluesy leads.
5. Bass
Turning this Bass control will affect the amount of
low frequencies or bottom end in your guitar tone
when on the Clean Channel. Rotating this control
clockwise will increase the lower tones and,
depending on other settings, will generally make
your tone warmer. By turning the Bass control
anti-clockwise you will reduce the amount of bass
frequencies in your tone which will make your
sound sharper, thinner and more cutting.
It should be remembered that your guitar will
probably be the main influence in your overall
sound and a naturally bassy guitar for example
will probably need less bass on the amplifier than
a naturally bright guitar.
6. Treble
By adjusting this Treble control you can add or
take away the higher frequencies in your guitar
tone when on the Clean Channel. By turning up
the Treble control and increasing those high
frequencies you will make your guitar sound
brighter and more cutting.
7. Ch.2 On LED
When illuminated this LED indicates that the
Overdrive Channel has been selected.
From Jim Marshall
I would like to thank you personally for selecting
one of our Marshall MG Series guitar combos.
Your new amplifier has been designed by the same
team of British designers who created all of the
great Marshall amps. It is built to the customary
exacting Marshall standards and will give you an
incredible spectrum of sounds to complement a
wide range of playing styles, as well as being
designed to stand the test of time.
The Marshall name has adorned many of Britain’s
finest amps, from the early 1960’s through to the
present day. Some of the original vintage amps
have become highly sought after by both amp
collectors and working guitarists alike.
This new line of transistor guitar and bass guitar
combos have been released to unanimous acclaim.
Your combo is part of a new breed of Marshall
amplifier, which has benefited from years of
experience and continual investment in research and
development.
Not only is the sound quality of your Marshall MG
Series amp of a standard that you would only expect
to come from Marshall’s own design team. The
Marshall G30RCD also has a CD input to allow you
to play along to CD’s. The ultimate home practice
facility.
I would like to wish you every success with your
new Marshall MG Series amplifier, which I am sure
you will find a pleasure to play for years to come.
Yours Sincerely,
ENGLISH
1
WARNING! - Important safety instructions
PLEASE READ THE FOLLOWING LIST CAREFULLY
A. THE PLUG attached to the mains lead provided is wired in accordance with the following colour code:
Blue - Neutral. Green/Yellow - Earth. Brown - Live (UK Only).
B. ALWAYS ensure that the value of the fuse corresponds to the rating marked on the plug.
C. DO NOT use your Marshall MG amp in damp or wet conditions.
D. ALWAYS have this equipment serviced or repaired by competent, qualified personnel.
E. PLEASE READ this instruction manual carefully before switching on.
F. WARNING This apparatus must be earthed.
KEEP THESE INSTRUCTIONS
G30RCD Front Panel Features
Channel 1
Clean
Channel 2
Overdrive
Power
INPUT
Ch.Select
Ch.2
On/Off
FOOTSWITCH
LINE
OUT
HEAD
PHONES
CD
INPUT
0 10
VOLUME
0 10
BASS
0 10
TREBLE
0 10
GAIN
0 10
BASS
0 10
CONTOUR
0 10
TREBLE
0 10
VOLUME
0 10
REVERB
POWER
ON
G30R CD
1
3
4
5
6
8
9
10
11
12
13
14
15
16
17
18
7
2
Содержание G30RCD
Страница 3: ...ESPA OL...
