20608 Madrona Avenue, Torrance, CA 90503
Tel: (800) 800-6608 / (310) 333-0606 • Fax: 310-333-0688
www.marshall-usa.com
Marshall warrants the VAC-23SHU3 HDMI to 3G/HD/SD-SDI Converter to be free from defects
in the material and workmanship for 1 year from the date of purchase from an authorized
Marshall dealer. Should this product fail to be in good working order within 1-year warranty
period, Marshall will, at its option, repair or replace the unit, provided that the unit has not
been subjected to accident, disaster, abuse or any unauthorized modifications including static
discharge and power surges.
Unit that fails under conditions other than those specified above will be repaired at the current
price of parts and labor in effect at the time of repair. Such repairs are warranted for 90 days
from the day of reshipment to the BUYER. If the unit is delivered by mail, customers agree to
insure the unit or assume the risk of loss or damage in transit. Under no circumstances will a
unit be accepted without a return authorization number.
The warranty is in lieu of all other warranties expressed or implied, including without limitations,
any other implied warranty or fitness or merchantability for any particular purpose, all of which
are expressly disclaimed.
Proof of sale may be required in order to claim warranty. Cables are limited to a 30-day warranty
and cable must be free from any markings or scratches.
The content of this manual has been carefully checked and is believed to be accurate. However,
Marshall assumes no responsibility for any inaccuracies that may be contained in this manual.
Marshall will NOT be liable for direct, indirect, incidental, special, or consequential damages
resulting from any defect or -omission in this manual, even if advised of the possibility of such
damages. Also, the technical information contained herein regarding the VAC-23SHU3 features
and specifications is subject to change without further notice.
Warranty
N
B
051
61
9a
30
6) Web pages cannot log in
a, Check whether the camera is setup and in normal working modes.
b, Check whether the network cable is connected properly ( on Ethernet port the yellow light flashes to indicate normal
network cable connection)
c, Check whether your computer settings match camera segment and that the segment is consistent with the IP address
of the camera
d, Click “Start" and select "Run" and then type “CMD” in the computer; Click "OK" then turn on a DOS command window
to enter ping 192.168.5.163. Press the Enter key to appear message as follows: Description network connection is normal
