FRONT PANEL FUNCTIONS (CONT.)
ENGLISH
17. MOD
MOD is short for Modulation. Modulation FX in a conventional setup can be in stompbox
or rack form and often connect via an amplifier’s FX loop:
MODULATION FX
A:>>|<<
PARAMETER
VALUE RANGE
DESCRIPTION
Mode
CLS & VIB
Classic Chorus & Vibrato.
Speed
0 - 10
Controls the rate of the Chorus or Vibrato effect.
Depth
0 - 10
Adjusts the depth of the Chorus or Vibrato effect.
Tone
0 - 10
Boosts or cuts high & low frequency content in the
sound.
Flanger
Flanger can produce Chorus-like sounds, but is more vivid and is harmonically more
complex. It can create weird and wonderful sonic textures, like ‘jet plane’ Doppler FX
and resonant metallic whooshes. Flanger’s editable parameters are:
PARAMETER
VALUE RANGE
DESCRIPTION
Mode
JET & MET
Jet Flanger & Metallic Flanger.
Speed
0 - 10
Controls the rate of the Flanger effect.
Depth
0 - 10
Adjusts the depth of the Flanger effect.
Regeneration
0 - 10
Adjusts the amount of signal that is fed back to the
effect input, which makes the Flanger effect sharper.
PARAMETER
VALUE RANGE
DESCRIPTION
Mode
CLS & VBE
Classic Phaser & Vibe.
Speed
0 - 10
Controls the rate of the Phaser or Vibe effect.
Depth
0 - 10
Adjusts the depth of the Phaser or Vibe effect.
Regeneration
0 - 10
Adjusts the amount of signal that is fed back to the
effect input, which makes the Phaser effect sharper.
Chorus
Chorus and Vibrato FX apply a subtle pitch variation to the guitar signal taking your
sound from shimmering, delicate undulations to full on wobble. This can add depth
and width to clean sounds and fatten up solos. Chorus’s editable parameters are:
Phaser
Phaser uses all-pass filters to shift the guitar signal very slightly, modulating the
shifted, or phased, signal in relation to the original signal produces the classic Phaser
sound - great for tight funky lines, sweeps and swells. Phaser’s editable parameters
are:
FRONT PANEL FUNCTIONS (CONT.)
17. MOD (CONT.)
ENGLISH
MODULATION FX
A:>>|<<
18. DEL
DEL is short for Delay. Delay FX in a conventional setup can be in stompbox or rack form
and often connect via an amplifier’s FX loop. When you select DEL the switch’s LED will
remain lit red for two seconds before flashing to indicate the current Delay tempo. CODE’s
Delay FX are:
Studio
Studio Delay is a high fidelity delay line. Its longer delay time enables you to create
layered loops of up to 4 seconds. Studio Delay’s editable parameters are:
DELAY TYPES
PARAMETER
VALUE RANGE
DESCRIPTION
Time
0 - 4000
Controls the Delay repeat time in milliseconds.
Feedback
0 - 10
Adjusts the number of Delay repeats.
Frequency
0 - 10
Adjusts the amount of higher frequency content in the
Delay repeats.
Level
0 - 10
Adjusts the level of the Delay effect.
A:>>|<<
Tremolo
The cool sounding Tremolo effect is created by the signal amplitude being modulated
up and down. Tremolo can produce a variety of sonic characteristics from delicate
shimmer to heavy Tremolo throb. Tremolo’s editable parameters are:
PARAMETER
VALUE RANGE
DESCRIPTION
Mode
VLV & SQR
Valve Tremolo & Square Wave Tremolo.
Speed
0 - 10
Controls the rate of Tremolo oscillation.
Depth
0 - 10
Adjusts the depth of the Tremolo effect.
Skew
-50 to +50
Adjusts the shape of the waveform that is performing
the amplitude modulation. The variation of the wave
shape across the value range moves between vintage
and modern sounding Tremolo.
