WARNING! IMPORTANT SAFETY INSTRUCTIONS
COMPLIANCE STATEMENT
This device complies with Part
15 of the FCC Rules.
Operation is subject to the
following two conditions: (1)
This device may not cause
harmful interference, and (2)
This device must accept any
interference received, including
interference that may cause
undesired operation.
Warning: Changes or
modifications to this unit not
expressly approved by the party
responsible for compliance
could void the user’s authority
to operate the equipment.
Note: This equipment has been
tested and found to comply
with the limits for a Class B
digital device, pursuant to
Part 15 of the FCC Rules.
These limits are designed to
provide reasonable protection
against harmful interference in
a residential installation. This
equipment generates, uses and
can radiate radio frequency
energy and, if not installed
and used in accordance with
the instructions, may cause
harmful interference to radio
communications. However,
there is no guarantee that
interference will not occur
in a particular installation. If
this equipment does cause
harmful interference to radio or
television reception, which can
be determined by turning the
equipment off and on, the user
is encouraged to try to correct
the interference by one or more
of the following measures:
- Reorient or relocate the
receiving antenna.
- Increase the separation
between the equipment and
receiver.
- Connect the equipment into
an outlet on a circuit different
from that to which the receiver
is connected.
- Consult the dealer or
an
experienced
radio/TV
technician for help.
This equipment complies
with FCC RF radiation
exposure limits set forth for an
uncontrolled environment. This
equipment should be installed
and operated with a minimum
distance of 20 centimeters
between the radiator and your
body.
Industry Canada caution.
This device complies with
Industry Canada licence-
exempt RSS standard(s).
Operation is subject to the
following two conditions:
(1) This device may not cause
interference, and (2) This device
must accept any interference,
including interference that may
cause undesired operation of
the device.
Francais:
Le présent appareil est
conforme aux CNR d’Industrie
Canada applicables aux
appareils radio exempts de
licence.
L’exploitation est autorisée aux
deux conditions suivantes:
(1) l’appareil ne doit pas
produire de brouillage, et
(2) l’utilisateur de l’appareil
doit accepter tout brouillage
radioélectrique subi, même si le
brouillage est susceptible
d’en compromettre le
fonctionnement.
2200
ENGLISH
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not install near any heat sources
such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
8) Do not defeat the safety purpose of
the polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding
prong. The wide blade or the third prong
are provided for your safety. If the provided
plug does not fit into your outlet, consult an
electrician for replacement of the obsolete
outlet.
9) Protect the power cord from being
walked on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
10) Only use attachments/accessories
specified by the manufacturer.
11) Unplug this apparatus during lightning
storms or when unused for long periods of
time.
12) Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain or
moisture, does not operate normally, or has
been dropped.
13) WARNING: To reduce the risk of fire or
electric shock, do not expose this apparatus
to rain or moisture.
14) The appliance coupler is used as the
disconnect device, the disconnect device
shall remain readily operable.
15) The apparatus shall not be exposed to
dripping or splashing and that no objects
filled with liquid, such as vases, shall be
placed on the apparatus.
This “bolt of lightning” symbol indicates uninsulated material
within your unit may cause an electric shock. For the safety of
everyone in your household, please do not remove product covering.
The “exclamation point” calls attention to features for which
you should read the enclosed literature closely to prevent
operating and maintenance problems.
CODE is a new generation of Marshall amplifier. Fully programmable, CODE combines
authentic modelling of classic and contemporary Marshall tones with professional
quality FX. CODE preamp, power amp and speaker cabinet models have been developed
in collaboration with audio software pioneers Softube to create Marshall-Softube
(MST) modelling. Featuring Bluetooth
®
& USB connectivity, and Marshall Gateway™
compatibility, CODE is a powerful tool that lets you make music your way.
INTRODUCTION
OVERVIEW
ENGLISH
Power (RMS)
Presets
Speaker
Footcontroller
Weight
Size (in mm)
Connectivity
100 Watt (at 8 Ohm)
100 User editable Presets
2 x 12” Custom Voiced (CODE100 combo)
4-Way Programmable (PEDL-91009, sold separately)
CODE100: 21.0kg & CODE100H: 8.9kg
CODE100: 700 x 280x 480 & CODE100H: 525x 200 x 220
Bluetooth
®
4.0 & USB 2.0
CODE100 TECHNICAL SPECIFICATION
CODE is loaded with sonic possibilities. It has 14 MST preamps, 4 MST power amps
and 8 MST speaker cabinets. CODE features 24 FX: including Compressor, stompbox
Distortions, Auto Wah, Pitch Shifter, Chorus, Vibrato, Phaser, Vibes, Flanger and Tremolo.
It includes Studio, Vintage, Multi and Reverse Delays, Tap Tempo, and studio quality
Reverbs. Including Gate, you can have up to 5 FX simultaneously.
Using the Marshall Gateway App for your iOS or Android device you can control CODE’s
settings remotely via Bluetooth and share Presets with other CODE users. You can stream
audio from your device, computer or music player through CODE’s speaker or headphones
for practice, or jam along with tracks from your music library. Connect via USB to use your
CODE amplifier as a DAW interface.
We sincerely hope that you enjoy your CODE amplifier and we wish you every success,
whatever your performance situation. Thank you for choosing Marshall.
- The Marshall Team
BEFORE GOING ANY FURTHER
WARNING! IMPORTANT SETUP INFORMATION
Ensure that the specific mains input voltage rating that your amplifier has been
manufactured for matches your electricity supply. This is indicated on the rear panel of
the amplifier.
Your amplifier is provided with a detachable mains (power) lead, which should be
connected to the MAINS INPUT socket on the rear panel of the amplifier (#24 in this
manual) before the mains electricity outlet.
