marsden MHS-2500I, Руководство пользователя, Страница: 14 / 17

Error Messages
Low Battery
Battery power is insufficient for the scale to
operate. Please replace the 6x AAA batteries.
Out of Tolerance – Over Zero
The scale cannot find zero. Check that
nothing is on the scale and retry.
Out of Tolerance – Under Zero
The scale is below zero range. Check that
nothing is on or catching the scale and retry.
Scale overload
The scale’s maximum capacity has been
exceeded. Please reduce the loading and try
again.
Scale Underloaded
The weight on the scale is below the
minimum weight reading. Please increase
the loading.
EEPROM Error
This indicates there is a fault with the scale
’ s
software and is normally caused by a fault
with the load cell or wiring. Contact your
local service representative.
Page 13