Mars Comfort-Aire RXTS Series Скачать руководство пользователя страница 3

IOM  -  

RXTS Series

3

 Page 3

Important Safety 

Instructions

Important Safety Instructions

Inside you will find many helpful hints on how to use and maintain your air conditioner 

properly. Just a little preventive care on your part can save you a great deal of time and 

money over the life of your air conditioner. You'll find many answers to common 

problems in the chart of troubleshooting tips. If you review our chart of Troubleshooting

Tips first, you may not need to call for service at all.
To prevent injury to the user or other people and property damage, the following

instructions must be followed. Incorrect operation due to ignoring of instructions may 

cause harm or damage. The seriousness is classified by the following indications. 

.

READ THIS MANUAL

This symbol indicates the possibility of death or serious injury

This symbol indicates the probability of death or serious injury.

.

Always do this.

Never do this.

CAUTION

NOTICE

This symbol indicates the possibility of injury or damage to property.
Indicates information considered important, but not hazard-related.

WARNING

DANGER

Plug in power plug 

properly.

Do not modify power 

cord length .

Always ensure effective

 grounding.

   

Otherwise, it may cause

   electric shock or fire due     

   to excess heat 

   generation. 

It may cause electric 

shock or fire due to 

heat generation.

 

Incorrect grounding 

 may cause electric 

 shock. 

  

It may cause electric 

  shock or fire due to 

  heat generation. 

It may cause electric shock 

It may cause failure of machine 

of electric shock.  

It may cause electric shock or fire. 
If the power cord is damaged, it must 

be replaced by the manufacturer or 

an authorised service centre or a 

similarly qualified person in order to 

avoid a hazard.

  

Do not operate or stop the 

unit by inserting or pulling 

out the power plug.

Do not operate with wet 

hands or in damp 

environment.

Do not allow water to run into

electric parts.

Do not damage or use an 

unspecified power cord. 

!

!

!!

!

Unplug the unit if strange sounds, 

smell, or smoke comes from it. 

   

It may cause fire and 

  electric shock.  

  

It may cause fire and electric 

  shock.

Do not use the socket if 

it is loose or damaged. 

DANGER

Содержание Comfort-Aire RXTS Series









































Отзывы: