Mars ATL-15, Руководство по эксплуатации и обслуживанию

Страница: 11 / 40

11
6. Technical description of the parachute
6.1.
Pilot chute PV
– 031 – 1A (fig. 2)
It is designed for pulling put the canopy from the container. The base of the
canopy (1) of the pilot chute, and it is made of polyamide fabric.
The stop (2) is made of woven curtain
– rough. The pilot chute is reinforced with
tapes (3), which form the fastener in the lower part (4). Cylindrical shape steel
spring (5) is sewn in the pilot chute. The top part of the pilot chute and the
location of the spring attachment include the sewn tape loops with fitted metal
grommets (6), designed for passing through the closing cord and folding and
fitting the pilot chute in the container.
Fig. 2
6.2.
Bridle
SŠ – 054 (fig. 3)
The bridle connect the pilot chute with the pole vent cords of the parachute
canopy. It is made from polyamide cavity with 2,000 mm length. Both ends of the
bridle are fitted with lugs for the connection with the canopy and the pilot chute.
Fig. 3