Mars ATL-15 SL Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 52

Mars ATL-15 SL Скачать руководство пользователя страница 47

47

CHAPTER III

Instructions for using the parachute

1.

Preparation of the parachute before flying

Prior to the flight, the pilot will check the placing of the static line pins in the
closing cord lugs, the upper pin inserted in the ripcord lug, sealing thread for
no damage, and the date of the parachute packing.
It  is  also  necessary  to  check the  state and function  of  the parachute metal
parts.
After  the  parachute fitting,  it  is  necessary  to adjust the  length  of  the  straps
by means of buckles on the harness.

2.

The parachute use with static line VL-037

2.1 Conditions for use

The static line can be anchored in the aircraft solely in the designated
location.

2.2

Warning

The use of static line does not enable controlled parachute opening in
such way to prevent the parachute contact and fall due to the aircraft
wrecks!

3.

Parachute opening

See CHAPTER I. article 3

– The parachute function.

Specialist  inspection  must  be  completed  upon  using  the  parachute
(opening).
If the parachute is damaged during the use, it must be sent for repair to the
organisation authorized to perform the maintenance.

«
...
45
46
47
48
49
...
»

Содержание ATL-15 SL





















































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды