MARS Company MK-I/II Скачать руководство пользователя страница 24

 

 

 

Information to the User 

 

Warning: 

Changes or modifications to this device not expressly approved by 

MARS Company could void the user’s authority to operate the equipment. 

FCC Class B: 

“NOTE: This equipment has been tested and found to comply with the limits for a 

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against harmful interference in a 

residential installation. This equipment generates, uses, and can radiate radio 

frequency energy and, if not installed and used in accordance with the 

instructions, may cause harmful interference to radio communications. However, 

there is no guarantee that interference will not occur in a particular installation. If 

this equipment does cause harmful interference to radio or television reception, 

which can be determined by turning the equipment off and on, the user is 

encouraged to try to correct the interference by one or more of the following 

measures: 

•  Reorient or relocate the receiving antenna. 

•  Increase the separation between the equipment and receiver. 

•  Connect the equipment into an outlet on a circuit different from that to 

which the receiver is connected. 

•  Consult the dealer or an experienced radio/TV technician for help.” 

 

RF Exposure: 

This equipment complies with FCC radiation exposure limits set forth for an 

uncontrolled environment. This equipment should be installed and operated with 

minimum distance 20cm between the radiator and your body. This transmitter 

must not be co-located or operating in conjunction with any other antenna or 

transmitter. 

Innovation, Science, and Economic Development (ISED) Canada: 

This device complies with Industry Canada license-exempt RSS standard(s).  Operation is subject to 

the following two conditions: (1) this device may not cause interference, and (2) this device must 

accept any interference, including interference that may cause undesired operation of the device. 

 

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio 

exempts de licence.  L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit 

pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage 

radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. 

 

Cet équipement est conforme aux limites d’exposition aux radiations dans un environnement non 

contrôlé.  Cet équipement doit être installé et utilize à distance minimum de 20 cm entre le 

radiateur et votre corps.  Cet émetteur ne doit pas être co-localisées ou opérant en conjonction avec 

tout autre antenne ou transmetteur. 

 

 

Page 21 of 21 

 

Содержание MK-I/II

























Отзывы: