08=&
1589.33.9165 4.5;.3
./21 %%
11 CHANGING PARAMETERS USING THE SMS
COMMAND
All programming parameters for GSW1 can also be sent by SMS command. Each SMS command
should start and stop with semicolon. If the confirmation SMS is needed,
glk t)u
at the beginning
of the command SMS.
The first SMS is SMS with telephone numbers (TN1
s
TN5). If you would like to check which
telephone numbers are programmed in GSW1 please use the following command:
;PTN;
Return SMS is (example):
;TN1=0;TN2=0;
If you would like to enter telephone numbers in to GSW1 you can use the following example:
;TN1=040713470;TN2=+38643364850;
F^ pfl nflc\ cab] kf i][]am] [fe^aidYkafe PJP niak] t
+
u Z]^fi] PJP [fddYe\8
;+TN1=040713470;TN2=+38643364850;
Return SMS from GSW1 is:
;TN1=040713470;TN2=+38643364850;
NOTE
You can use the same programming procedure for all parameters.
It is also possible to change different parameters with one SMS. Consider that the SMS message
should not be longer than
160 characters
(included space characters).
If you would like to change the following parameters
TN1, IN1, OS1, ID1, LN1
and would like to
receive confirmation SMS, try next example:
;+TN1=+38640713470;IN1=1;OS1=15;ID1=120;LN1=1;
Send SMS message to GSW1 telephone number and in a few seconds you receive SMS message
from GSW1. The sentence of the SMS must be the same as the one you have sent to GSW1 before.