12
I33LK/I36LK Front Face Attachment Installation
1. Remove the Top Filler piece from the Base unit by unfastening its three [3] screws. This part is not required for the
I33LK/I36LK model and therefore can be discarded. However, be sure to keep the screws for fastening the
I33LK/I36LK.
2. Install Vent Adapter plate. Please see Installation of Vent Pipe for reference.
3. Install the I33LK/I36LK Front to the appliance by lowering it onto the side attachments, aligning the four [4] Mounting
Tabs and Slots together. Position the tabs into the slots and then lock it into place by lowering the I33LK/I36LK Front
onto the hook assembly.
4. Once the I33LK/I36LK is in place simply fasten it to the appliance with the three [3] screws taken out from the Top
Filler piece.
5. Install the ON/OFF switch into the slot provided located at the lower left hand side of the appliance.
NOTE: The Louver Kit Front does not need to be removed to access the Glass Door and service the unit.
