ENGLISH
28
1.
Use the wall plate as a template and mark
out the three holes in the wall.
2.
Check that the tip of the triangle is aligned to
the steel ball.
3.
Predrill the holes with a 10 mm stone drill to
a depth of at least 60 mm.
4.
Insert a concrete anchor (W-B) in each hole.
5.
Fit the wall plate on the wall with three
screws (W-A). The wall plate is horizontal
when the steel ball in the slot is aligned to
the tip of the triangle.
Cover plate
1.
Fit the cover plate as shown in
fig.
Installation of adapter and spacers
Place a soft cloth on a flat surface that can support the weight of the appliance.
Place the appliance with the screen resting on the cloth. Align the adapter and spacers to the holes
on the back of the appliance.
Fasten the adapter and spacers to the appliance with suitable screws and washers (fig. A and B).
NOTE!
The installation of the adapter depends on the type of plug. For a plug as in fig. a install as shown
in step A, and for a plug as in fig. b install as shown in step B.
