EN
28
• Place the power cord so that it cannot be stood on, or clenched.
• Make sure the appliance is not connected to the mains supply during thunder
storms and when the product is not going to be used for a prolonged period.
• The appliance has double insulation (protective class II) and therefore does not
need to be grounded.
Additional safety instructions
• The use of controllers, settings or procedures that are not described in these
instructions may result in exposure to harmful radiation.
• Do not place the product on a soft, porous or fragile surface. The rubber feet
may leave marks or stains on the surface. We recommend that a cloth, tray or
the like is placed under the product.
• Clean with a dry cloth.
• NOTE: This equipment has been tested and complies with the limit values for
class B digital appliances, according to part 15 of the FCC regulations. These
limit values are designed to provide sufficient protection against harmful
interference when installed in the home. The equipment generates, uses and
can emit radio frequency energy, and if not installed and used according to the
instructions could cause interference to radio communication. Interference can
occur in separate installations. If the equipment produces harmful interference
to radio or television reception (which can be checked by switching the
equipment on and off), we recommend that users attempt to rectify
interference in one of the following ways:
– Realign or move the receiver antenna.
– Increase the gap between the equipment and the receiver.
– Connect the equipment to an output in another circuit than the one the
receiver is connected to.
