EN
41
SAFETY INSTRUCTIONS
Read the user instructions carefully before use.
Save them for future reference.
FCC compliance
The product complies with part 15 of FCC regulations. Usage is subject to the following conditions.
– The product must not cause harmful interference.
– The product must withstand the interference it is exposed to, including interference that
could cause unwanted functionality.
WARNING:
Never modify the product in any way. The manufacturer cannot accept liability for any
damage caused by unauthorised modifications.
NOTE:
This equipment has been tested and complies with the limit values for Class B digital
appliances, according to part 15 of the FCC regulations. These limit values are designed to provide
sufficient protection against harmful interference when installed in the home. The equipment
generates, uses and can emit radio frequency energy, and if not installed and used according to the
instructions could cause interference to radio communication. Interference can occur in separate
installations. If the equipment produces harmful interference to radio or television reception (which
can be checked by switching the equipment on and off), we recommend that users attempt to rectify
interference in one of the following ways:
• Realign or move the receiver antenna.
• Increase the gap between the equipment and the receiver.
• Connect the equipment to an output in another circuit than the one the receiver is connected to.
• Contact your dealer or a qualified radio/television technician for assistance.
• The equipment complies with FCC limit values for exposure to radiation in an uncontrolled
environment. The equipment must be installed and used with a gap of at least 20 cm between
the radiator and the body.
• Do not expose the memory card to stress in the form of bending, pressure or shock.
• Do not expose the memory card to powerful electromagnetic or magnetic fields, such as near
speakers or television receivers.
• Do not expose the memory card to intense heat or cold.
• Keep memory cards clean and do not expose them to water or any other liquid. A memory card
that has become wet can be dried with a soft cloth.
• Do not use a memory card from another camera without formatting it first.
• Do not use a memory card that has been formatted in another camera or card reader.
• Data on the memory card can be damaged if the memory card is used incorrectly, or if the power
supply is disconnected, or the memory card is removed during recording, deletion, formatting or
reading.
• Back up important data on another medium, i.e. hard disk or CD.
User instructions for
action camera
ENGLISH
