![Marquant 014369 Скачать руководство пользователя страница 31](http://html1.mh-extra.com/html/marquant/014369/014369_operating-instructions-manual_1730409031.webp)
EN
31
NOTE:
Never apply any oil on the precipitation sensor.
MANUAL SETTING
1. Press the MODE/SET button for 2 seconds.
The unit for temperature starts flashing.
Use the HIST/UP and DOWN buttons to
select °C or °F.
2. Press the MODE/SET button to confirm.
The unit for the amount of precipitation
starts flashing. Use the HIST/UP and
DOWN buttons to select mm or inches.
3. Press MODE/SET to confirm. The 12/24
hour indicator starts flashing. Use the
HIST/UP and DOWN buttons to select
12-hour or 24-hour displaying.
4. Press the MODE/SET button to confirm.
The hour value starts flashing. Use the
HIST/UP and DOWN buttons to set the
hour.
5. Press the MODE/SET button to confirm.
The minutes value starts flashing. Use the
HIST/UP and DOWN buttons to set the
minutes.
6. Press the MODE/SET button to confirm.
The values for month and date start
flashing. Use the HIST/UP and DOWN
buttons to select the display format
month/day or day/month.
7. Press the MODE/SET button to confirm.
The year value (2018) starts flashing.
Use the HIST/UP and DOWN buttons
to set the year.
8. Press the MODE/SET button to confirm.
The month value starts flashing. Use the
HIST/UP and DOWN buttons to set the
month.
9. Press the MODE/SET button to confirm.
The date value starts flashing. Use the
HIST/UP and DOWN buttons to set the
date.
Assembly
1. Screw the mounting screws through the
holes in the base of the precipitation
sensor. Do not overtighten.
2. Check with the spirit level that the sensor
is horizontal.
3. After fixing the sensor base, place the
funnel over the sensor and check that
the catch engages in the base.
NOTE:
Do not place the sensor near other similar
sensors – risk of signal interference.
Emptying and cleaning
The sensor is emptied automatically, but it is
important not to mount it in a hollow, which
can prevent the precipitation running out
through the bottom.
NOTE:
Make sure that the sensor is accessible for
cleaning, if leaves or other debris clog the
funnel.
MAINTENANCE
CLEANING
Clean the rain gauge at regular intervals (every
three months, depending on how much it
rains).
1. Press the funnel catch and lift off the
funnel.
2. Carefully remove any debris from the
precipitation sensor.
3. Remove debris from the precipitation
funnel and its outlet.
4. Clean the outlet.
5. Replace the precipitation funnel.
Содержание 014369
Страница 4: ...2 1 1 2 3 7 8 4 5 6 9 10 12 11 1 2 3 4 5 6 7 8...
Страница 5: ...3 1 2 3 4 5 6 7...
Страница 6: ...4...
Страница 7: ...5 6...