Marquant 001-949, Руководство по эксплуатации

Страница: 19 / 21

EN
19
6. Speaker
7. CD tray
8. PLAY/PAUSE – Playback/Pause
9. SKIP UP – Next track
10. REPEAT/PROG – Repeat/Programme
11. LED indicator On/Off
12. AUX connection
13. Battery compartment
14. Handle
15. Volume control
16. Mode selector CD/AUX or OFF
17. Mains plug
18. LED PLAY/PAUSE
19. LED REPEAT
FIG. 1
USE
Installation
1. Unpack the CD player and check that all the
parts are included and undamaged.
2. Check that the mains voltage corresponds
to the rated voltage on the type plate.
3. Connect the power cord to the CD player.
4. Plug the plug into a power point.
5. Place the CD player so that there are a
few centimetres of free space behind for
ventilation.
On/Off
1. Set the CD in on mode by moving the mode
selector to CD/AUX .
2. Set the CD in off mode by moving the
mode selector to OFF .
Battery operation
For battery operation, insert 6 C batteries (R14)
in the battery compartment.
FIG. 2
NOTE:
Unplug the CD player from the mains for
battery operation.
CD PLAYBACK
Start
1. Set the mode selector in CD/AUX mode.
2. Open the CD tray.
3. Place a CD, with the text up, in the CD
player and close the tray.
4. The disc is checked and the LED display
shows the number of tracks.
NOTE:
In the following situations the CD player
switches mode automatically:
– If CD mode is selected but no disc is
inserted.
– If CD mode is selected and the
playback is paused or stopped.
– If AUX mode is selected but no
external unit is connected.
– If AUX mode is selected and the
playback is paused or stopped.
Playback/pause (PLAY/PAUSE)
1. Start the playback with the button PLAY/
PAUSE . The first track starts to play.
2. The playback can be paused by pressing
the button PLAY/PAUSE . The status lamp
flashes. Press again to resume playback.
The status lamp stops flashing and stays
on.