Marlon 350E, Руководство по обслуживанию

Страница: 9 / 18

Changing from B to C-size blades:
1.) Disconnect the power cord from Marlon 350.
2.) Remove top cover from machine.
3.) Remove the clamp stop shoulder bolts on both sides.
4.) Remove the three 10-24 nylock nuts from each side.
5.) The left clamp blade is now free and can be removed.
6.) Remove the right anvil blade by lifting it straight up.
7.) Remove the left forming blade by lifting it straight up.
8.) Detach the right cutter blade from the drive pin. (The right
cutter blade is now free.)
9.)
Remove the two .126” B-size spacers from each side.
10.) Remove the right forming blade by lifting it straight up.
The right clamp blade is now free.
11.)
Detach the left cutter blade from the drive pin, the arm
drive screw must be loosened to free cutter blade (See step 8 for
details.)
12.)
Leave the left anvil blade on, because it is used in all
three setups.
13.)
Change the clamp stop to its correct hole position.
14.) Reassemble the cutter blade assemblies in reverse order
using the correct color-coded parts.
15.)
Note:
No washers or spacer is used on the left-hand
shoulder bolt when using the C-size blade configuration.