Doc No: SM-351 Iss A 18.07.16
Marlec Eng Co Ltd
Settings
These are accessed via the ENTER key. The first screen displayed shows the controller serial number.
Press ENTER to view the programming menu. Use the UP and DOWN keys to scroll through and ENTER
to select an option. A cursor indicates the option available to select.
Option 1: Charge Sources On/Off
Toggle the UP and DOWN buttons to change between ON and OFF. Press ENTER to Exit.
Note that when switching WG to OFF the controller enters a soft stall routine, this slowly applies the
stall to decelerate the turbine. During this routine, the following is displayed and when complete the
display returns to the programming menu.
ON or OFF is
displayed
Use buttons
below indicated
by the arrows.
4
