Doc No: SM-351 Iss A 18.07.16
Marlec Eng Co Ltd
UP DOWN ENTER
Mounting—2 Options are Available
Surface mount using the supplied back box. Fix the back box using suitable screws and fit the display
using screws supplied.
Recess mount by discarding the back box and mount directly to a panel with a 100mm x 62mm cut out,
using suitable screws .
Fit the screw caps supplied to finish.
Electrical Connection
The power supply for the unit is provided from the WG1200 controller via the serial data cable
supplied. Locate the RJ11 sockets on the controller and display unit to connect the 2 devices. The
screen will power up. Press any button to illuminate the backlight.
Note: In late 2016 a wireless Bluetooth kit will be available which will plug in at each end in place of the
cable. The Remote Display will require a local 12/24v dc power supply which is connected via the
terminal block mounted on the pcb. Important: Do not connect a local power supply to these
terminals if the remote is connected to the 1200 Controller via the serial cable.
2
