manualshive.com logo in svg

Markusson Triplematic, Оригинальное руководство пользователя

Поделиться
Скачать
Markusson Triplematic Скачать руководство пользователя страница 34

Maintenance and Service

Triplematic

34 Triplematic 201708 EN  

6  Maintenance and Service

6.1  Safety during maintenance

  WARNING  Make sure that the power is turned off before you install, operate or perform maintenance on the 

machine.

  WARNING  Before you install, operate or do maintenance on the machine, you must read the safety information 

in this manual. Obey the instructions in this manual to prevent injuries or damage to the equipment.

  WARNING  Always wear safety gloves, protective glasses, and any other personal protective equipment 

suitable for the current work task.

  WARNING  The user must only do maintenance that is described in this manual on the machine. Only approved 

and trained service technicians can do service on the machine.

6.2  Frequency of maintenance

Maintenance Step

When 

Description

Cleaning

Daily

Clean the machine daily to remove grinding 

dust. Use a vacuum cleaner or brush to clean 

the machine.

Change grinding wheels.

When worn or damaged.

See section 7.3, “Change the grinding wheel 

and 

fit the grinding wheel guard”.

Center the grinding wheel.

When worn or if the chain has a 

different width than the previous.

See step 14 of section6.2.5, “Make the 

grinding settings”.

Check and adjust the wire.

Once every 3 months, depending on 

usage.

See section 7.6, “Check and adjust the wire”.

Adjust the chain lock.

When the chain is loose during 

operation.

See section 7.5, “Adjust the chain lock”.

Содержание Triplematic

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды