Triplematic
Triplematic 201708 EN 31
Operation
21. Set the chain pusher switch to OFF when the
grinding head is in its uppermost position and
the chain lock is not engaged.
Important! If the chain has double-links, pull the
chain back so that the grinding starts on the second
double-link. If the chain has a joint with an irregular
cutter sequence, start grinding behind it.
5.2.6 Use skip tooth mode
Triplematic Auto Chain Grinder has 2 chain pusher
modes:
• The standard mode, used for sharpening
standard chains.
• The skip tooth mode, used for sharpening
3/8
"
pitch “standard skip sequence chains”
that have twice the distance between the
cutting teeth.
Adjust the chain pusher mode so it accurately
sharpens the type of chain you’re using.
To set the machine into skip tooth mode:
1. Use a finger or a tool to press plate B away
from plate A until it unlocks, and then move it in
the direction of the “Skip tooth” arrow.
B
A
2. Use a finger to press plate B downward and
forward into the “Skip tooth” position.
3. Sharpen the chain as instructed in section 6.3,
“Operate the machine”.
To set the machine back into standard mode:
1. Use a finger to move plate B in the direction of
the “Standard” arrow, until it enters its locked
position.
2. Sharpen the chain as instructed in section 6.3,
“Operate the machine”.
5.3 Operate the machine
WARNING Always wear safety gloves,
protective glasses, ear protection, and any other
personal protective equipment suitable for the
current work task.
WARNING Stop the machine immediately if it
does not work correctly!
Note: For a video demonstration of how to install
and operate the machine, go to Markusson.se.
B
A
B
A
