Marksman MCU-100N Скачать руководство пользователя страница 7

Страница: 7 / 99

Puncher sound level

In general, the puncher sound increases when the board is thin and the clamp is not steadily attached.

Sound cover attached: 55db, with silencer: under 50db

Puncher with weighty substance in open space: 72db with silencer: 56db

Puncher with a board less than 2 t in open space: 87db with silencer: 68db

Soundproof cover for a board less than 2 t in open space: 65db, with silencer: 50db.

Please read the following before executing the program

F1: M_MENU (Manual marking mode) I

Can mark and modify the selected block. This function is not suitable on the Automation line

F2: A_MARK (Automatic marking mode)

Marking mode. Includes status window for the marking and produced amount of the block data for the

Puncher.

F3: EDIT (Editing mode)

Edit the marking contents such as font, font size, letter space, Lot number, operation method, and

Direction of the letters.

F4 : FILE (File mode)

Save the marking data and the value of parameter to the S/D card.

F5 : SETUP (Adjustment mode of parameter)

Control the speed of marking and motor. As well as you can designate the data of shift and

daily code

F6 : TEST (Test mode)

Can check the condition of stepping motor and sol. Valve on this mode. Also you can modify

the time, year, month and day.

F7 : LOAD (User font set up mode)

Can load USER font and Logo (.plt file) which is in SD card and JS-1000 on this mode.

F8 : COMM (Serial communication mode)

Can control the marking machine by external PC through RS-232 Cable .

F9 : SIMULATION (Simulation marking)

Can do simulation marking on (F1)M_MARK , (F2)A_MARK , (F8)COMM. You can use this function

when you set the marking location.

F10 : MARKING START

Can give Start signal on (F1)M_MARK , (F2)A_MARK , (F8)COMM.

F11 : RESET (Reset )

Can reset the controller by keyboard on (F1)M_MARK , (F2)A_MARK , (F8)COMM

For other keys,

ENTER : You must press

“

ENTER

”

after modify the data.

SPACE BAR : If press the Space bar on the Font and Type section, operation mode is converted.

Direction Key : Searching for the file on (F4)FILE or check the moving of the motor on (F6)TEST.

DELETE/INSERT : Check the condition of sol.valve on (F6)TEST mode.

Содержание MCU-100N




































































































Результаты поиска

Содержание MCU-100N

Отзывы:

Бренды по названию

Популярные бренды

Marksman MCU-100N, Руководство пользователя

Результаты поиска

Содержание MCU-100N

Отзывы:

Бренды по названию

Популярные бренды