Marksman M11a, Руководство по установке

Страница: 19 / 32

One Chirp Two Chirps Three Chirps Four Chirps
Button LED One Pulse LED Two Pulses LED Three Pulses LED Four Pulses
(Factory Default Setting)
Pink Wire
Factory Security
Disarm Signal Output
Pink Wire
Start Status Output
(Shock Sensor Bypass)
Pink Wire
Two Step Door
Unlock Output
Alarm Feature Programming (Part 3)
Turn the ignition switch from the OFF position to the
ON position 3 times leaving it in the OFF position the
third time.
Before 15 seconds has passed, push and release the
valet switch 5 times then push the valet switch a sixth
time and hold it down until 3 short chirp/beeps + 1
long chirp/beep is heard then release it. You are now in
Part 3 programming mode.
Step 1 Step 2
OFF
ON
3X 5X + 1X (Hold)
Step 3
Remote Feature Programming
Use the transmitter buttons as illustrated to adjust the features required. Keep re-pressing the transmitter button that
relates to the feature you want to adjust until the correct amount of chirps/beeps is heard. Move on to the next feature.
ON
Turn On the Ignition
3 long chirps & 3 flashes of the
parking lights will confirm exit of
the programming mode.
Note: Waiting 15 seconds after the
last command will also cause the
system to automatically exit the
programming mode.
Step 4
Brown/White Wire
(-) 200mA Horn Output
with Chirp Indicator On
Black/Green Wire
Channel 4 Output
Momentary Output
Black/Green Wire: Ground Output During the Remote Start (Crank)
19
Brown/White Wire
Factory Security Rearm
Signal Output
+
Black/Green Wire Channel 4
Output
Latched Output
Black/Green Wire Channel 4
Output
Latched Output and Reset
with Ignition "ON"
Black/Green Wire Channel
4 Output
Timer Programming
(Set to any intervals between 1
Sec. and 2 minutes)
Five Chirps
LED Five Pulses
Black/Red Wire
Channel 5 Output
Momentary Output
+
Black/Red Wire
Channel 5 Output
Latched Output
Black/Red Wire
Channel 5 Output
Latched Output and Reset
with Ignition "ON"
Black/Red Wire Channel 5
Output
Timer Programming
(Set to any intervals between
1 Second and 2 minutes)
Black/Violet Wire
Channel 6 Output
Momentary Output
+
Black/Violet Wire
Channel 6 Output
Latched Output
Black/Violet Wire
Channel 6 Output
Latched Output and Reset
with Ignition "ON"
Black/Violet Wire
Channel 6 Output
Timer Programming
(Set to any intervals between
1 Second and 2 minutes)
White/Blue Wire
1 Pulse Activate
White/Blue Wire
2 Pulse Activate
White/Blue Wire
3 Pulse Activate
Brown/White Wire
(-) 200mA Horn Output
for Trigger Only
M11A-IM 3/8/05 3:43 PM Page 19