RECHARGING BATTERIES
Your drill is delivered partly charged. Charge fully before first use. Connect
charging plug to the charging base. Connect charger to wall socket then
the power indicator will light up. Put your battery into the charging base, the
charging light indicator will show charging in process.
When the charger is connected to the power supply, the green light will
illuminate, when put the battery is placed in the charger the RED and
GREEN lights will illuminate together. Charge time is between 3 to 5 hours.
Do not exceed 5 hours at one charge.
TORQUE ADJUSTMENT
Your drill is fitted with a variable clutch which is operated with the torque
adjustment ring. Once adjusted the clutch will work at a predetermined
torque this avoids screwing too deeply or damaging your drill. Torque
adjustment varies with the types of screws used and working material.
Always start using a low torque and increase gradually to achieve suitable
operating.
WARNING
Charging time must not exceed 5 hours, any longer may cause damage
to the battery. Avoid charging your drill in freezing conditions, ie below
zero degrees centigrade. Charging power would not be sufficient at these
temperatures.
