7
2. General Notes
• The operating instructions are a component part
of the product and must therefore be kept in a safe
place as well as included with the product, if the
latter is given to someone else.
•
Märklin switched mode power packs may only be
used with products from the brands Märklin and
Trix.
3. Technical Data
See the specifications plate on the power pack.
Example:
Art.-Nr. 66111
Nur für trockene Räume
PRI 230VAC 50-60Hz
SEC 12 VDC 12 VA
IP40
+
_
STEGER 50-01212.01a
92237 Sulzbach-Rosenberg
Schillerstrasse 30
MM-YY
4. Overload Protection
A built-in overload protection protects the switched
mode power pack from damage in the event of an
overload or a short circuit. The switched mode power
pack turns itself off and waits until the problem has
been corrected. Do not try to run any locomotive or
control any turnout as long as the problem is still
present.
