marklin 60973, Руководство пользователя

Страница: 7 / 20

7
B/GR = Märklin connection to the pickup shoe (red) / DCC
track right rail
v = front connection
LR = rear light(s) (yellow)
+Ub = light(s) ground wire (orange)
LV
= front light(s) (gray)
+Ub = light(s) ground wire (orange))
AUX 1 = physical output (brown/red)
AUX 2 = physical output (brown/green)
MR = Motor Output 1 (blue)
MV = Motor Output 2 (green)
= Speaker connections
CLK = not available at present
DAT = not available at present
IN1 = not available at present
IN2 = not available at present
IN3 = not available at present
GND = Electronics ground (violet)
+5V = (pink)
After finishing the wiring, mount the circuit board with the
pad included for this purpose. Make sure that the circuit
board cannot cause a short circuit.
Before you plug the decoder in , it must be programmed
correctly.
Outputs 3 (forwards) and 4 (reverse) must be active for
the pickup shoe changeover. The setting for this is done in
mDT3 be means of the function activator „ALWAYS“ and
„Action to ALWAYS“. The programming here depends on the
wiring, and it may be necessary to swap the outputs in the
functions.
Description Wire Color
NEM Märklin
Motor Connection 2 gray blue
Conductor Current Pickup, Track, Left
(DC) Outer (AC)
black brown
Front Lights white gray
Aux 1 (physical output) green brown/red
Common Wire for Lights /Aux 1-2 blue orange
Rear Lights yellow yellow
Conductor Current Pickup,
Track, Right (DC) Center (AC)
red red
Motor Connection 1 orange green
Aux 2 (physical output) violet brown/green
GND Electronics ground violett
+5V pink
Cross Referencing the Colors for the Wires