marklin 416000 series, Инструкция по эксплуатации

Страница: 5 / 28

Function
This locomotive comes with a built-in high-effi-
ciency propulsion (37...) and offers these features:
● Can be operated with conventional AC power
(no. 6646 or 6647 transformer, 32 VA), Märklin
Delta or Märklin Digital. This locomotive is not
designed for operation with locomotive controllers
for other systems (examples: DC power, pulse
width control, multi-train controls of other makes).
● Automatic recognition of the mode of operation.
● 80 Digital (5 Delta) addresses can be set with
coding switches.
● Maximum speed and acceleration/braking delay
can be changed (braking delay works only with
Märklin Delta or Digital).
● Headlights that change over with the direction of
travel can be turned on / off in digital operation or
in operation with the Delta-Control 4f (Nr. 66045).
The headlights will vary in brightness with the speed
of the locomotive when the latter is operated
with AC power. The headlights are off at all
times when the locomotive is operated with the
6604 Delta-Control. The headlights are on at all
times when the locomotive is operated with the
6607 Delta-Station.
Only in Digital operation with the
6021 Control-Unit:
● Switching range (canceling of the acceleration /
braking delay that has been set for the locomotive).
The maintenance work necessary after normal ope-
ration is described below.
The special motor and
the LED headlights do not require maintenance.
Please see your authorized Märklin dealer for repairs
or spare parts.
No warranty or damage claims shall be accepted in
those cases where parts neither manufactured nor
approved by Märklin have been installed in Märklin
products or where Märklin products have been
converted in such a way that the non-Märklin parts
or the conversion were causal to the defects and / or
damage arising. The burden of presenting evidence
and the burden of proof thereof, that the installation
of non-Märklin parts or the conversion in or of Märklin
products was not causal to the defects and / or
damage arising, is borne by the person and / or
company responsible for the installation and / or
conversion, or by the customer.
5