marklin 29020, Инструкция по эксплуатации

Страница: 9 / 64

9
1 no. 66361 switched power pack
1 no. 60657 Mobile Station
1 Operating instructions
D GB F NL
1 Operating instructions
S DK
1 Operating instructions Mobile Station
D GB
1 Operating instructions Mobile Station
F NL
1 Operating instructions switched power pack
1 Get on Board brochure
1 Warranty card
4. Technical Information
Switched power pack: input 230 volts AC
output 18 volts DC/36 VA
Voltage supply train: max 22 volts DC
Power consumption of train: max 13 VA
H0 Gauge (1:87 scale)
4.1 Overload Protection
A built-in overload circuit protects the switched
mode power pack and the digital connector box from
damage in the event of an overload or short circuit.
The locomotives will all come to a stop.
(See Section 10)
5. Notes about Using this Model for
the First Time
• The switched power pack may not be plugged
into the wall outlet yet.
• Set up the layout as shown in Part 6.
6. Preparations
6.1 Joining Track Sections and Setting up Track
When setting up the track, please note the track
numbers and the sequence for the track sections!
The number is located on the underside of the
track.
Putting track together
Taking
track apart
172
B
0
B
0
24 172
0
B

Plug the digital connector box into any section of
track as shown in the diagram.
red
brown
After the digital connector box is connected to a
section of track, the track can be put together as
shown in the following diagram.
digital connector box