Markilux markilux pergola Скачать руководство пользователя страница 9

9

markilux.com

 Attention - risk of injury!

The LED lights can heat up a lot! The lighting has to be switched off for some some minutes to cool down before you touch the individual 

lamps.

 

Attention: 

You must never hang any objects or similar in front of the lamps, and it should be ensured that there are no objects 

immediately underneath the projection profile both in retracted and in extended state.

Observe in particular the safety clearances in "Important notes".

 

Attention - danger of fatal injury!:

 Do not grab or pull the mains leads (230 V) or cables visible at every movement point of the 

folding arm! Do not suspend any objects from these mains leads!

The mobility of the mains lead is limited in temperatures below zero. Therefore it has to be ensured, whether the electrician has protected the 

connection of your lighting via an RCCB (30mA), so that any eventual cable breakage does not pose any hazard.

 Attention:

 

For safety reasons, the electronic transformer switches off automatically at a temperature of 80°C, and switches on again 

after an appropriate cooling down period.

Automatic switchoff: 

Thanks to the integrated timer, the spotlights switch off automatically (io-home control technology: after 

6 hours

; RTS 

wireless remote control technology: after 

24 hours

). The lighting can be reactivated by double-clicking either the switch or the remote 

control.

The 

radiation intensity 

of these LED lamps is harmless to people and underruns the RG 2 area acc. EN 62471. However, it is 

suggested not to look for a long time at the centre of the light source.

5  markilux pergola with lighting (optional)

EU energy label according to EU 

directive 874/2012:

Energy efficiency A is very efficient. E is 

inefficient. The markilux LED spotlights 

and LED line are assigned to energy 

efficiency category A.

Swivel LED spotlights in the cover 

support tube

LED line lateral in the guide rails

LED line in the cover support tube

11

10

12

9

10

12

11

10

11

LED line in the cover support tube

12

LED spotlights in the cover support tube

9

Additional E-Box for LED line lighting in the guide tracks 

(without cover support tube)

10

LED line in the guide tracks

LED spotlights

LED line

Содержание markilux pergola












Отзывы: