manualshive.com logo in svg

Markilux markilux pergola, Руководство по эксплуатации, Страница: 8 / 11

Поделиться
Скачать
Markilux markilux pergola Скачать руководство пользователя страница 8

8

markilux.com

2. Hold the crank rod with one hand on the 

upper and one hand on the lower turning 

handle. During the operating procedure, pull 

the crank slightly towards the operator.

1. Insert the funnel of the crank rod into the 

gear adapter and hook in through rotation.

If the gear eyelet is on the right-hand side of 

the front profile (as illustrated):
Extension: turn the crank anti-clockwise.

Retraction: turn the crank clockwise.
If the gear eyelet is on the left side, the 

directions of rotation are exactly the opposite.

 Attention! 

During retraction and extension of the awning, the crank rod must be removed from gear eye, as otherwise the cover support tube 

and the front profile of the awning will get damaged.

Remove the crank rod from the gear eye after retraction or extension, and store the crank rod in a safe place. If the crank rod should remain in 

the gear eyelet, it must be secured against uncontrolled movements (e.g. in case of wind).

 Attention! markilux pergola with lowerable support post:

 

It is not possible to use the shadeplus if one of the posts has been lowered! It may only be operated when the projection profile is in 

horizontal position! Otherwise the cloth will wind diagonally and become damaged during operation!

Direction of rotation at shadeplus retraction:

If the winding direction is wrong, the valance bottom profile will not 

close shortly at the front blind.

Tip: if the valance bottom profile does not retract flush into the front 

profile, extend the shadeplus cover completely and retract with the 

same rotary movement of the crank. Afterwards operate the crank in 

the opposite rotating direction when extending and retracting.

4  markilux pergola with additional shadeplus in projection profile

 Attention!

Always retract the shadeplus cover first before retracting the entire 

awning. If the main motor of the awning is equipped with a controller, 

never leave your extended shadeplus cover unattended, because the 

awning could retract unintentionally!

When it is windy, please take particular care that the shadeplus 

awning-cover with its valance bottom profile does not carry out any 

uncontrolled movements. Retract your shadeplus cover immediately 

if it gets windy.

 

4.1  Shadeplus with hand crank operation

 

4.2  Shadeplus with motor operation

Содержание markilux pergola












Отзывы:

Нет отзывов