Markilux 8800 tracfix Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 25

Markilux 8800 tracfix Скачать руководство пользователя страница 15

15

www.markilux.com

22

19

20

19

22

22

19

18. Pull the free end of the drive belt with

fluffy velcro (19) towards the front profile

(20) and connect it to the red end of the

velcro strip (22) (right and left track

profile).

19.



Attention!

The coloured end of

the velcro strip (22) must be in line with

the fluffy velcro end of the drive belt (19)

and they must be connected over their

entire surfaces.

20. Carefully pull the drive belt (19)

around the tensioning module with the

help of the velcro strip (22) (see chapter

5 - course taken by the drive belt) While

doing this, the drive belt must be held

slightly under tension at both ends.

Avoid forced or jerky pulling actions

(both right and left).

19

19

23

2

19

18

13

21. Pull the drive belt (19) tight. Do not

cut off the loose end of the drive belt

(both right and left).

22. By pulling the drive belt (19) out of

the guide track (2), put pressure on the

tensioning module until the split-pin (23)

can be withdrawn easily (on both the

right and left). The awning is now under

tension.

23. At the inspection openings check

transport bands (19) for twisting and

correct seating on the fabric roller (18)

and the belt rollers (13).

13

19

2

24

2

24

26

25

24. Check transport bands (19) in the

track profiles (2) for twisting and correct

seating on the belt rollers (13).

25. For awnings with cover support tube:

Establish positions for the cover support

tube brackets (24) (on both the right and

left). Clip the left cover support tube

bracket to the guide track (2) and firmly

tighten the jaws of the bracket with a SW

6 spanner.

26. Push the cover support tube (25)

onto the screw (26) of the bracket (24).

«
...
13
14
15
16
17
...
»

Содержание 8800 tracfix


























Отзывы:

Нет отзывов