8
STOP
Protection against overheating
Multiple extension and retraction of the awning in rapid succession
results in an automatic motor switch-off to preserve it from
overheating. After cooling down the motor switches itself on again in
operating readiness.
Always retract the Shadeplus cover before retracting the entire
awning. If the main motor of the awning is equipped with a
controller, never leave your extended shadeplus cover unattended,
because the awning could retract unintentionally!
When it is windy, please take particular care that the shadeplus
awning-cover with its valance bottom profile does not carry out any
uncontrolled movements. Retract your shadeplus cover immediately
if it gets windy.
Extend the awning by pressing the buttons button for extension /
retraction. With radio-controlled operation, your markilux specialist
must exactly explain the functions on the radio remote control to
you, since, depending on the equipment, he can set these for you
individually.
Observe here the separate operating instructions of the motor
and, if available, of the controller manufacturer. The end stop for
extension / retraction of the awning is limited. The end stop for the
extension direction will be set by your specialist dealer.
1
=
UP
- button
2
=
STOP
- button
3
=
DOWN
- button
4
=
Scroll wheel
5
=
Channel selection
button
6
=
AUTO / MANU
- switch
7
=
PROG
- button
markilux hand-held remote control io (868
MHz)
markilux hand-held remote control RTS
(433 MHz)
io 1-channel
io 5-channel
io / RTS
back
RTS 1-channel
RTS 4-channel
2
1
3
2
5
4
6
7
5
2
1
3
2
3 Awning with motorised operation
4 Awning with shadeplus
markilux 779 tracfix / 879 tracfix
markilux.com
Operation manual