8
5.3
Raise arm and relieve the load. By turning the
socket head cap screw (SW 4), bring the arm to the
horizontal position.
5.4
Tighten socket head cap screws SW 4
(1)
and
SW 10
(2)
on the inner bracket.
6. Fixture covers
6.1 Face fixture cover
6.1.1
From an awning pitch angle of approx. 15°,
it is necessary to cut out the plastic covers of the
wall fixtures at the thin-walled bridges with a
safety knife according to the pitch angle setting.
Screw on wall cover.
6.1.2
Screw on wall cover with socket head cap
screw (SW 5).