Market Forge Industries ST-E, Руководство по обслуживанию и запасным частям

Страница: 14 / 21

RECALIBRATION PROCEDURE
1 Set the larger dial (D) of the Element Control Switch at
14 Ibs. pressure (dial (D) fully clockwise).
2. Loosen the two small screws (A) and (C) located on
either side of the dial slot (B)
3. First, note the position of the slot (B) in
relation to the dial (D). Then, while holding the dial
stationary, insert a screwdriver in the slot to adjust.
(Clockwise to increase steam pressure —
counterclockwise to decrease pressure). Tighten
screws to hold this adjustment.
4 Check this new sotting by operating the Steam It
through a trial cycle and note the pressure gauge
reading at the precise moment when the contactor
"clicks out" This should be at 14 Ibs. (Check may also
be made by continuity) Repeat the process of
adjustment until the Steam It test operates to
satisfaction
THE PILOT LIGHT
The Pilot Light is located at the lower right front of the
front panel. This unit is wired to operate when the heating
elements are on. The circuit will be broken when the timer
returns to the "ZERO" position. Thus, when the pilot light
is on and off it signifies that the heating elements are
cycling on and off to maintain cooking pressure in the
cooking chamber
OPTIONAL STEAM-IT STAND
Market Forge Steam-Its can be supplemented with an optional stand
for utility where maximum compact ness is desired. The sturdy
stainless steel stand unit is equipped with adjustable leg extensions
which allow the unit to be installed and leveled over existing contours
in the floor.
The open under-shelf of the stand gives added utility, providing a
handy tabouret for cooking utensils- The open design lends itself to
maximum sanitary conditions because of the ease in which periodic
cleanings can be made.
Though simple in design and appearance, the Steam-It Stand is the
ideal arrangement for mounting in that it elevates the unit to the most
efficient working height, can be leveled easily, and may easily be
maintained in a state of cleanliness.
5154