Market Forge Industries FT-20CE, Руководство пользователя, Страница: 5 / 12

3-1
1
5
4
3
2
6
Figure 3-1 FT-12CE
Section 3 OPERATION
MODEL: FF-20CE
ELECTRIC SELF-GENERATING COUNTER- TOP STEAM JACKETED KETTLE
3.1 COOKING
1. Ensure that the external electrical shut-off to kettle is on.
2. Check pressure gauge for correct cold kettle reading. Reading should be 25-30 In.Hg (84-100 k/Pa) of vacuum. If reading is
not low enough, follow VENTING procedure prior to using kettle. (See Section 3.3).
3. Place power switch in ON position.
4. Preheat kettle by placing thermostat knob at '10' and wait until TEMPERATURE light goes off.
NOTE: Preheating should not be used when cooking milk and egg food products which adhere to hot cooking surfaces. These
foods should be placed into kettle before heating is begun.
5. Add food to be cooked into kettle.
6. Place thermostat knob at required temperature setting from '1' to '10' coinciding with a temperature range from roughly 90°F to
300°F (32°C to 149°C) in the reservoir. Approximate cooking temperatures with water at various thermostat settings are as
follows:
THERMOSTAT APPROXIMATE TEMPERATURE (WATER)
SETTING
° F ° C
4 90° 32°
5 125° 52°
6 160° 71°
7 195° 91°
8 231° 110°
9 273° 134°
10 300° 149°
7. When cooking is finished, set thermostat knob and power switch
to OFF position.
8. Pour finished product from kettle using tilt handle. Be careful to
avoid splashing.
9. Add water to kettle for cleaning purposes.
10. Wash kettle thoroughly. See CLEANING procedure.
Figure 3-1 FT-12CE
1. Tilt Handle
2. Power Switch
3. Low Water Indicator Light
4. Temperature (Heat Indicator) Light
5. Temperature Control Thermostat
6. Vacuum/Pressure Gauge