MarkBass CL 810, Обзор

Страница: 8 / 14

H A L F P O W E R S T R E S S
1/2 Manufacturer Spec - Tested at 150 W into 4 ohms
TEMPERATURE 0 F Idle 5min 15min 30min
Front Power Switch 75 80 90 96
Front Input Jack 74 80 86 93
Rear Power Jack 74 81 90 104
Rear Speaker Jack 77 83 96 98
Power Transformer 77 95 105 116
Output Transformer 76 88 94 119
Middle KT88 Retainer 95 117 155 144
Fan noise
Ambient
52 dB SPL Fan Low 57 dB SPL Fan High 64 dB SPL
Signal interrupt (sec) 0 0 0 0
Thermal shutdown (sec) 0 0 0 0
POWER
TESTS
bass
gear
POWER
CERTIFIED
8 ohms 1kHz
199 watts
MARKBASS
CLASSIC 300
F U L L P O W E R O U T P U T
Unregulated Line Voltage, Amplitude Sweep
3 to 5% Total Harmonic Distortion (THD)
Average initial AC line voltage 120.4 - 122.4
Nominal 8-ohm Nominal 4-ohm Nominal 2-ohm
1K SINE WAVE
Power
199 Watts 295 Watts 266 Watts
Input Signal 1.0 Volts 1.0 Volts 1.0 Volts
Voltage drop 0.7 Volts 0.6 Volts 1.0 Volts
G STRING @ 98Hz
Power
199 Watts 288 Watts 263 Watts
Input Signal 0.6 Volts 1.0 Volts 1.0 Volts
Voltage drop 0.7 Volts 0.9 Volts 1.0 Volts
D STRING @ 73Hz
Power
195 Watts 286 Watts 263 Watts
Input Signal 0.6 Volts 1.0 Volts 1.0 Volts
Voltage drop 0.6 Volts 0.8 Volts 0.7 Volts
A STRING @ 55Hz
Power
193 Watts 288 Watts 251 Watts
Input Signal 0.6 Volts 0.9 Volts 0.6 Volts
Voltage drop 1.0 Volts 0.4 Volts 0.9 Volts
E STRING @ 41Hz
Power
196 Watts 272 Watts 251 Watts
Input Signal 0.7 Volts 0.8 Volts 0.4 Volts
Voltage drop 0.4 Volts 0.4 Volts 1.1 Volts
B STRING @ 31Hz
Power
193 Watts 278 Watts 244 Watts
Input Signal 0.6 Volts 0.8 Volts 0.4 Volts
Voltage drop 0.6 Volts 0.5 Volts 0.2 Volts
Manufacturer ratings: 300 / 300 / 300 watts at 8 / 4 / 2 ohms.
2 ohms 1kHz
266 watts
4 ohms 1kHz
295 watts
K E Y T O T E S T S
Half Power Stress:
How well does this head handle the heat?
Full Power Output:
These numbers are largely self-explanatory, but
please note that the Input Signal tells you what
input voltage was required to hit our mark, with
the EQ set to “optimally flat” and the gain stages
set for best THD performance using a 1 kHz signal.
Voltage Drop shows how much the AC line
voltage sagged during our testing.