Mark2 E-Motion CRUISER, Руководство пользователя

Страница: 36 / 48

not to pinch the inner tube between the edge of
the tyre and the rim.
Slowly inflate the tube up to the specified air
pressure meanwhile making sure the tyre edges
remain inserted in the rim. The control circle of
the tyre and rim contour must be concentric.
Manually screw in the plastic cap on the valve
until it tightens properly. re-install the eBike
wheel.
(!!!) A new inner tube is a better and more secure
solution than simply repairing.
A wheel with a broken or sagged spoke is much
more vulnerable compared to a wheel with well-
tensioned spokes. If during a cycling a spoke
gets broken you should return home at a very
low speed and ride very carefully as the wheel is
unbalanced due to the broken spoke which could
result on other spokes being broken as well thus
making the eBike unusable.
Wind the broken spoke around the closest one
to avoid the risk of the free end whipping the
wheel or being entangled between the wheel
and the frame.
If the wheel does not rotate because of tyre
friction on the frame, carry it by hand, if
necessary. Contact a specialist service centre or
seek qualified assistance.
1. Rim Tape
2. Rim
3. Valve
1. Inner tube
2. Tyre