Mark2 E-Motion CRUISER Скачать руководство пользователя страница 22

When storing the battery for more than a month, 
(e.g. during wintertime) it is important to place the 
fully charged battery on a flat and dry place.

• 

 Keep the battery and charger away from water 
and heat sources.

• 

 To optimise battery life charge it monthly

• 

 Do not connect positive and negative 
terminals.

• 

 Keep the battery away from children and pets.

• 

 Use the battery and the charger only for the 
intended purpose as part of your eBike.

• 

 Do not cover the battery or the charger and do 
not place objects over them or on them.

• 

 Do not expose the battery or the charger to 
shocks such as dropping.

• 

 Stop charging immediately if you notice 
something unusual.

Charging Care

When the battery is lower than 1bar on the meter 
the motor will stop working. If only lights are being 
used they will continue to be powered for about 2 
hours.

The handlebar-mounted display shows the 
remaining power when the bike is in use.

Perform a full discharge of the battery (by riding 
your eBike until the battery is completely empty) 
after 15 normal charges or every three months. 
This will help to extend the life of the battery. The 
charging time is about 6-8 hours per charging 
cycle. Please do not charge the battery for more 
than 10 hours at a time.

Use

Содержание E-Motion CRUISER

















































Отзывы: