Operation
Stand-Alone Operation
1.
Setting the work mode according to your requirement to set the mode
：
SOUND ACTIVE or AUTO MODE see the function setting chart.
2.
Connecting the power the unit start to work, beam come out.
3.
For SOUND ACTIVE mode adjust the sound sensitivity knob on the back
of the unit to make
the unit more or less sensitive to sound active
Mode is running
; Auto
automatically.
Master-Slave Mode
1.
Setting the work Mode. Choose a unit to function as master mode,
set dipswitch to select Sound Active or Auto mode. T he other must
be set to Slave mode, set dipswitch to select
Slave mode. Master
unit controls the slave unit.
2.
Use standard XLR microphone cable to chain your units together
via the XLR connector on the rear of the units. For longer cable runs we
we suggest a terminator
at the last fixture
3.
Turn on the all units
power, the units begins reset, then the unit
begins working. The slave units will react the same as the master
unit
4.
In sound active mode, adjust audio
sensitivity knob to make the unit
more or less sensitive
in sound active; in Auto mode, the unit
is
running automatically
PAG. 4
User Manual/Manual de Instrucciones LX 50G PRO
EN
