Mark LX 50G PRO, Руководство пользователя

Страница: 10 / 20

In stand-Alone operation and in the
state of close if the power supply
red indicator is light up, and the
sound active indicator light is light
up.
Its fault to set up as Slave mode
please set up as master mode.
In DMX mode, the laser is off and
the DMX signal indicator is
unlighted
Make sure to set up the DMX mode,
and make sure to have a good
connection.
In DMX mode, the unit can ’t be
controlled by the DMX console, but
the DMX signal indicator I flashing.
Please make sure the DMX console
and unit have the same channel.
In stand-Alone operation and in the
state of close if the power supply
red indicator is light up, and the
sound active indicator light isn’t light
up.
Because sound is too small make for
laser shut off in sound active, please
increase the music volume or
increase audio sensitivity with
sensitivity knob.
PAG. 10
User Manual/Manual de Instrucciones LX 50G PRO
Troubleshooting
Trouble Solution
IF the power supply indicator
doesn’t light up and the laser
doesn’t work.
Please check the power supply and
the input voltage.
In stand -Alone mode, if the pattern
direction is offset, a part of pattern
was shading beam.
Maybe voltage of the power supply
is too low , causing the motor can ’t
work well. Please make sure the
range of the motor voltage within
±10V,and please use the low voltage
regulator.
EN