Mark GSW+ 30, Техническое руководство

Страница: 3 / 32

Warranty policy
CE-marking
The release of the CE-marking is the official recognition of the quality of design, manufacturer and
performance of this unit. The life and performance will be at the highest level when the implementation
and maintenance are properly carried out and done by the regulations in force.
Responsibility
This unit may only be used for which MARK has designed and fabricated it. MARK cannot be held liable for
damages to persons, animals or property if it is caused by error of installation, controls or maintenance or
not permissible use of the unit. The unit may only be equipped with original accessories. MARK cannot be
held liable for any damages resulting from use of an accessory that is not suitable for the unit.
The units must be installed by qualified professionals, in compliance with the applicable regulations and
in accordance with the instructions in this manual. The references to the standards, rules and guidelines
mentioned in this manual are for information purposes and are only valid on the date of issue thereof.
MARK is responsible for the conformity of the device to the applicable rules, guidelines and standards
at the time of commercialization. The knowledge and compliance with the legal provisions, as well as
the norms inherent in the design. Project planning, startup and maintenance are the responsibility of the
consultant, the installer and the user.
Delivery – Storage
The GSW+ is delivered on a wooden pallet, protected by a cardboard box and a plastic film. Immediately
after arrival, the condition of the unit delivered must be checked (even if the packaging is intact).
Additionally, ensure that the device delivered corresponds with the order. With regard to the product
warranty: the general conditions of MARK are in force.
3