Mark 0662551, Техническое руководство

Страница: 19 / 20

19
10.4 Disassembly FBA-K Ultra
1. Turn off the main switch and lock it.
2. Remove the power supply and electrical connection
in the junction box “K”.
3. Close the hot water supply.
4. Remove the condensate hose.
5. Disassemble the heating medium.
6. Loosen the ceiling screws and remove the unit.
7. Loosen the grid on the left and right of the pump.
8. Remove the pump from the holder plates.
9. Remove the sheet metal screws
[1] (12x).
10. Remove rear with attached fan, unit is now still
attached to rear wall.
11. Remove fixing screws
[2]
(3x) for heater.
12. Remove the heater and the mounting plates.
10.5 Removal and destruction
To disassemble the air heater it must be without power. All power cables must be removed by a
qualified electrician.
More-over, all fluid-carrying parts must be completely empty. This must be done by a professional
company that properly draines the water with anti-freeze.
After that, the air heater can be disassembled at the scene. This should also be carried out by a
specialised company that has knowledge of the environmentally friendly removal of parts.
In the handling of dust-sensitive components (filters) and parts of mineral wool it is wise to wear appropriate
respiratory protection.
Destruction
In our FBA devices, the following material is used:
Housing and attachments:
•
Galvanized steel
• Stainless steel 1.4301
• Aluminum AIMg
• Copper
Sealants:
•
Polyurethane waste code: 55908, 080404
Isolation material:
•
Mineral wool waste code: 31416
• Soundproofing
All materials can be disposed through the appropriate waste collection services.
EN