7
Operating Voltage
& Frequency
The Nº37 CD Transport is set at the factory (internally) for 100V, 120V, 200V, 220V,
or 240V AC mains operation as appropriate for the country in which it is to be
sold. Make sure that the label on the rear of the Nº37 (adjacent to the power
cord) indicates the correct AC operating voltage for your location, as attempting to
operate the Nº37 at an incorrect voltage can damage the unit.
(Note that only
230V units are sold in the European Union countries, per CE requirements.)
The Nº37 CD Transport is also set at the factory for operation on either 50 or
60 Hz AC line frequencies, as appropriate for the country in which it is to be
sold. It will not operate if it senses an incorrect line frequency.
Warning!
Neither the voltage nor the line frequency setting may be
changed by the user. There are no user serviceable parts
inside the Nº37. Only qualified, authorized service personnel
may open the Nº37 CD Transport, as hazardous voltages exist
within the unit.
If the AC mains voltage or frequency indicated on your Nº37 is incorrect, please
contact your local, authorized Mark Levinson dealer or distributor.
The Nº37 can easily be powered by a normal 15-ampere AC mains line. If other
devices are also powered from the same AC line, their additional power con-
sumption should be taken into account.
