31
You may search for a particular passage on the CD using
fast forward
and
rewind,
by
pressing and holding
the
next
and
previous
buttons (respectively). Use
the reduced-volume audible scan available during these modes to search the CD
until the laser pickup reaches the passage you want to hear.
As soon as you release the button, play resumes.
If you search past the beginning or end of a track, the laser pickup will move on
to the previous (or next) track. If you try to search forward past the end of a CD
or program, the laser pickup will stop at the end of the last track. If you try to
search backward past the beginning of a CD or program, the laser pickup will
stop at the beginning of the first track of the disc (or playlist).
Direct Time Access
You may use
time
on the Remote Control to begin play at a specific
time
on the
disc.
1. Select the desired track using either
next
and
previous
or the
numeric keypad
on the Remote Control.
2. Press
time
, then press the numbered buttons corresponding to
when you would like play to begin. (The numbers you select will
appear in the
time
portion of the display.)
3. To begin play at that point, press
play
. (To pause the disc at the
same point, press pause instead of play. This allows for extremely
precise “cueing up” of a disc when making a recording, for ex-
ample.)
Note: The time you select depends on the selection you’ve made
with the display mode button: elapsed or remaining, CD or track.
For example, if you want to begin play one minute and thirty seconds into track
2, select track 2 by pressing
2
on the remote control. Press
time
, enter
1 3 0
, then
press
play
. (This example assumes that the most recently used display mode was
elapsed time on track
.) If you do not press
play
, the Nº37 will timeout after ten
seconds (that is, it will “forget” that you had begun to do something, and revert to
normal operation).
Alternatively, you might want to set the Nº37 to play music for a specific period
of time. Say you’d like to listen to music until the evening news begins in 30 min-
utes. Make sure both the
time on disc
and
time remaining
LEDs are on (indicat-
ing
time remaining on disc
, the default display mode when in stop); press
time
;
enter
3 0 0 0
; and press
play
. This sequence will direct the Nº37 to a point 30
minutes from the end of the disc, and engage play at that point. When the music
ends, you will know it is time to turn on the news.
Pause
To suspend play while a CD is playing, press
pause
. To resume play at the same
point, press
pause
again, or press
play
(either will work).
After about two minutes in pause, the Nº37 will go into an “extended pause”
mode, showing
X-PAUSE
briefly in the display. Extended pause stops the disc and
turns off the laser against the possibility that you have been called away and may
not return for some time. The Nº37 will slowly flash the double bars (
"
) to indi-
cate that you are in the
extended pause
mode rather than normal pause.
Alternatively,
extended pause
may be engaged by pressing
and holding
the
pause
button until
X-PAUSE
is displayed. Pressing
pause
again (or
play
) will re-
