4
DECAPSENSE Instruction Manual Version 1.1
Operating Procedures:
1.
Enter the Reloader application. Note: the Mark 7®
DecapSense™
must be connected and
plugged into the console before you power on the machine for the first time.
2.
Calibrate and run the machine as normal. When a spent primer is not ejected the following
notification box will appear
No ejected primer detected!
. After you rectify the issue press okay
and proceed with normal operation.
Figure 1: No ejected Primer Notification
3.
Check the sensors tab on the tablet to ensure that it is enabled (green). If you wish to disable
the sensor for any reason it can be done on the fly.
Figure 2
: Enable/Disable DecapSense™
