background image

 

4.1.3 Layout (ST3) 

There are three different layouts for the compass rose.  

x

Press SET in the default view to enter the menu. Press the up/down buttons to 
select the Layout menu (ST3), press SET to enter the Layout menu. 

x

Use the up/down buttons to select a layout. A part of the selected layout is 
shown in the compass rose text field. 

x

Press SET short to enter the selected value or 

x

Press the Light button to reset the value to default (1) or 

x

Keep SET pressed for two seconds to exit to the default view. 

 
Example: 

press SET 

->  

 

ST1  Course alarm 

 

 

press up 2X  -> 

 

ST3  Display Layout  

 

 

press SET 

-> 

 

Layout  1= N NE E 

 

 

press Up/Down ->   

Layout  2= N   |   E 

 

 

press SET 2 seconds ->  Default Display (1)  

 

 

  

 

 

 
    Layout 1   

 

 

Layout 2 

 

 

Layout 3 

 

4.1.4 Key sound (ST4) 

Press SET and use the up button to select the ST4 menu. Press SET to enter the 
menu and now you can choose ON or OFF by pressing the up/down buttons.  

x

Press SET short to enter the selected value or 

x

Press the Light button to reset the value to default (ON) or 

x

Keep SET pressed for two seconds to exit to the default view. 

 

4.1.5 Contrast (ST5) 

Press SET and use the up button to select the ST5 menu. Press SET to enter the 
menu and now you can choose a value between 0 to 9 by pressing the up/down 
buttons.  

x

Press SET short and press the up/down buttons to select a contrast. 

x

Press the Light button to reset the value to default (0) or 

x

Keep SET pressed for two seconds to exit to the default view. 

 

4.1.6 Calibration (ST6) 

This Calibration menu can only be used in combination with the LCS, ECS1 or ECS3 
compass. 
Press SET and use the up button to select the ST6 menu. Press SET to enter the 
menu and now you can choose Auto or Manual by pressing the up/down buttons.  

Compass 

Display

  

CD110              

 

5

Содержание CD110
















Отзывы: