TROUBLESHOOTING
TROUBLESHOOTING
GUIDELINES
GUIDELINES
IMPORTANT:
Always unplug your Penguin Power Filter when
inspecting or disassembling for any reason.
If filter fails
to pump
water or
flow has
slowed...
Make certain
the outlet has power and is functioning
properly by first unplugging electrical cord momentarily,
then reconnecting to power source to restart the
Impeller.
Check
to make sure that Impeller Housing is firmly
seated in Filter Box and that water is at correct level.
Remove
Impeller Housing and make sure the
Impeller Assembly is free to rotate.A particle
of carbon or gravel may be interfering.
Inspec
t aquarium water level. Maintain at
1
/
2
inch
below frame.
Clean
inside of Intake Tube with flexible filter brush.
If filter
makes
excessive
mechanical
noise...
Make sure
that Impeller Housing is firmly seated
in Filter Box and that water is at correct level.
Remove
Impeller Housing and make sure the
Impeller Assembly is free to rotate.A particle
of carbon or gravel may be interfering.
Replace
worn Impeller Housing or worn Impeller
Assembly. Consult Parts List for correct part number.
If BIO-Wheel
splashes
and/or makes
excessive
water noise...
Allow
24-28 hours for “breaking in” period. Material
in a BIO-Wheel is not fully absorptive when new.
Check
aquarium water level. Lower than normal
levels can result in excessive splash or noise.
IF BIO-Wheel
fails to
move or
stops...
Don't panic.
Irregular rotation, including brief
pauses, is normal.
Inspect
BIO-Wheel bearings and axle for dirt or mineral
deposits. If evident, clean these areas carefully.
Make sure
all parts are installed properly and that there
are no obvious obstructions to free rotation.
Perform
regular Filter maintenance.
Marineland Customer Service:
800-322-1266
Monday - Friday, 8am - 5pm (Pacific time)
If air does
not evacuate
from
system...
Check
for cracks in Intake Tube and replace if defective.
Consult Parts List for correct part number.
16
17
